Practical Guide to 3D Printing and Planning in Orthopedics and Traumatology

Article Sidebar

PDF (Español (España)) PDF_EN HTML (Español (España))
Published: Feb 14, 2022
DOI: https://doi.org/10.15417/issn.1852-7434.2022.87.1.1416
Keywords:
3D preoperative planning, 3D printing, personalized intraoperative guides, clavicle fracture

Main Article Content

Bruno Gobbato
Department of Orthopedic Surgery, Hospital São José, Jaraguá do Sul, SC, Brazil
https://orcid.org/0000-0002-7779-0659
Daniel Moya
Orthopedics and Traumatology Service. Hospital Británico de Buenos Aires, Autonomous City of Buenos Aires, Argentina
https://orcid.org/0000-0003-1889-7699
Fernando Menor Fusaro
Istituto Pediatrico della Svizzera Italiana (IPSI), Bellinzona, Switzerland
https://orcid.org/0000-0001-9439-8555
Sergio Valente
Orthopedics and Traumatology Service, Hospital “Dr. Pedro T. Orellana”, Trenque Lauquen, Buenos Aires, Argentina
https://orcid.org/0000-0002-1567-5153

Abstract

Access to 3D planning and printing technology is destined to have a disruptive impact on the surgical practice of Orthopedics. Its advantages include a better understanding of the injuries, greater technical precision, shortened surgical times, decreased blood loss, and less exposure to X-rays. The aim of this publication is to provide a practical step-by-step guide using the treatment of a displaced middle-third clavicle fracture as an example.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Article Details

How to Cite
Gobbato, B., Moya, D., Menor Fusaro, F., & Valente, S. (2022). Practical Guide to 3D Printing and Planning in Orthopedics and Traumatology. Revista De La Asociación Argentina De Ortopedia Y Traumatología, 87(1), 122-130. https://doi.org/10.15417/issn.1852-7434.2022.87.1.1416
Issue
Vol 87 No 1 (2022)
Section
Nota técnica
Copyright (c) 2022 Revista de la Asociación Argentina de Ortopedia y Traumatología

Manuscript acceptance by the Journal implies the simultaneous non-submission to any other journal or publishing house. The RAAOT is under the Licencia Creative Commnos Atribución-NoComercial-Compartir Obras Derivadas Igual 4.0 Internacional (CC-BY-NC.SA 4.0) (http://creativecommons.org/licences/by-nc-sa/4.0/deed.es). Articles can be shared, copied, distributed, modified, altered, transformed into a derivative work, executed and publicly communicated, provided a) the authors and the original publication (Journal, Publisher and URL) are mentioned, b) they are not used for commercial purposes, c) the same terms of the license are maintained.

In the event that the manuscript is approved for its next publication, the authors retain the copyright and will assign to the journal the rights of publication, edition, reproduction, distribution, exhibition and communication at a national and international level in the different databases. data, repositories and portals.

It is hereby stated that the mentioned manuscript has not been published and that it is not being printed in any other national or foreign journal.

The authors hereby accept the necessary modifications, suggested by the reviewers, in order to adapt the manuscript to the style and publication rules of this Journal.

Author Biographies

Bruno Gobbato, Department of Orthopedic Surgery, Hospital São José, Jaraguá do Sul, SC, Brazil

Department of Orthopedic Surgery, Hospital São José, Jaraguá do Sul, SC, Brazil

Daniel Moya, Orthopedics and Traumatology Service. Hospital Británico de Buenos Aires, Autonomous City of Buenos Aires, Argentina

Orthopedics and Traumatology Service. Hospital Británico de Buenos Aires, Autonomous City of Buenos Aires, Argentina

Fernando Menor Fusaro, Istituto Pediatrico della Svizzera Italiana (IPSI), Bellinzona, Switzerland

Istituto Pediatrico della Svizzera Italiana (IPSI), Bellinzona, Switzerland

Sergio Valente, Orthopedics and Traumatology Service, Hospital “Dr. Pedro T. Orellana”, Trenque Lauquen, Buenos Aires, Argentina

Orthopedics and Traumatology Service, Hospital “Dr. Pedro T. Orellana”, Trenque Lauquen, Buenos Aires, Argentina

References

1. Skelley NW, Smith MJ, Ma R, Cook JL. Three-dimensional printing technology in orthopaedics. J Am Acad Orthop
Surg 2019;27(24):918-25. https://doi.org/10.5435/JAAOS-D-18-00746

2. Green N, Glatt V, Tetsworth K, Wilson LJ, Grant CA. A Practical guide to image processing in the creation of 3D
models for orthopedics. Tech Orthop 2016;31(3):153-63. https://doi.org/10.1097/BTO.0000000000000181

3. Levesque JN, Shah A, Ekhtiari S, Yan JR, Thornley P, Williams DS. Three-dimensional printing in orthopaedic
surgery: a scoping review. EFORT Open Rev 2020;5(7):430-41. https://doi.org/10.1302/2058-5241.5.190024

4. Tetsworth K, Block S, Glatt V. Putting 3D modelling and 3D printing into practice: virtual surgery and preoperative planning to reconstruct complex post-traumatic skeletal deformities and defects. SICOT J 2017;3:16.
https://doi/org/10.1051/sicotj/2016043

5. Roner S, Bersier P, Fürnstahl P, Vlachopoulos L, Schweizer A, Wieser K. 3D planning and surgical navigation of
clavicle osteosynthesis using adaptable patient-specific instruments. J Orthop Surg Res 2019;14(1):115.
https://doi/org/10.1186/s13018-019-1151-8

6. Vlachopoulos L, Schweizer A, Meyer DC, Gerber C, Fürnstahl P. Computer-assisted planning and patient-specific guides for the treatment of midshaft clavicle malunions. J Shoulder Elbow Surg 2017;26(8):1367-73.
https://doi.org/10.1016/j.jse.2017.02.011

7. Kim HN, Liu XN, Noh KC. Use of a real-size 3D-printed model as a preoperative and intraoperative tool for
minimally invasive plating of comminuted midshaft clavicle fractures. J Orthop Surg Res 2015;10:91.
https://doi.org/10.1186/s13018-015-0233-5

8. Menor Fusaro F, Di Felice Ardente P, Pérez Abad M, Yanguas Muns C. Three-dimensional imaging, modeling, and printing in the correction of a complex clavicle malunion. JSES Int 2021;5(4):729-33. https://doi.org/10.1016/j.jseint.2021.04.008

9. Cheah JW, Goodman JZ, Dang AC. Clavicle fracture malunion treated with an osteotomy guided by a threedimensional-printed model: A case report. JBJS Case Connect 2018;8(4):e98. https://doi.org/10.2106/JBJS.CC.17.00304

10. https://invesalius.github.io/ [Consulta: agosto 2021].

11. https://horosproject.org/download-horos/ [Consulta: agosto 2021].

12. https://www.slicer.org/ [Consulta: agosto 2021].

13. https://www.materialise.com/es/medical/software/mimics-innovation-suite/products-services/mimics [Consulta: agosto 2021].

14. https://www.meshmixer.com/ [Consulta: agosto 2021].

15. https://bitfab.io/blog/meshmixer/ [Consulta: agosto 2021].

16. https://ultimaker.com/es/software/ultimaker-cura [Consulta: agosto 2021].

17. Gross BC, Erkal JL, Lockwood SY, Chen C, Spence DM. Evaluation of 3D printing and its potential impact on
biotechnology and the chemical sciences. Anal Chem 2014;86(7): 3240-53. https://doi.org/10.1021/ac403397r